Sunday, December 6, 2015

Save 65%: Hack Your Own Coravin Argon Gas Capsules

The Coravin Wine Preservation System is fantastic. It’s an easy way to dispense wine without pulling the cork since the device cleverly replacing the excess volume with argon instead of oxygen (the enemy of wine). You can pour just a glass or two at a time and easily save the rest of the bottle for later.

However, the Coravin Argon Capsules are almost $10 each. And while they claim to pour 15 glasses of wine, they never seem to actually make it that far. As a result, we end up going through a capsule for every 2-3 bottles meaning there’s a “Coravin Tax” of up to $5.00 per bottle. Ouch!

Turns out there’s a cheaper way. While the Coravin Capsules claim to be proprietary, the metal cylinder is just a standard 3.5” food grade argon capsule. The only unique part of the capsule is the plastic cap.

This cap houses a very important rubber o-ring that ensures a good seal between the capsule and the Coravin. So, all we need to do is remove this cap from a used capsule and we can use it with much cheaper non-Coravin capsules!

To do this, grab a pair of channellock pliers for the metal body and a smaller pair of pliers for the cap. Grab the capsule with one set and the tip of the plastic cap with the other. Make sure you have a secure grip on both and turn counter clockwise if you’re facing the top of the capsule. With a little effort, you’ll unstick the glue and at which point you can easily unscrew the cap.

There are plenty of options for 3.5” food grade argon capsule. The cheapest I’ve been able to find are for another, much less effective, wine preservation system called Preservino. These capsules come in either a 4-pack or an 8-pack and in the larger case are only about $3.50 each for a savings of $6.50 per capsule!

Simply slip the cap you removed from the Coravin capsule onto one of the standard capsules. Pop this new capsule in your Coravin and you’re in business!


kellyJJ said...

"Simply slip the cap you removed from the Coravin capsule onto one of the standard capsules."
Slip? The top of my Coravin capsule is threaded so there's no slipping at all.
this is post outdated or did you simply misspeak? Using his hack requires threaded argon capsules.

Thomas said...

No threaded argon capsules needed. The interior diameter of the plastic cap including the threads is the same as the thread-less standard capsules. It requires a little pushing, but the plastic cap fits just fine on the standard capsule as pictured.

kellyJJ said...

Thanks, I will give it a try.

Truffaut said...

How did it turn out?

Thomas said...

Works great! The capacity of the new capsules its a little less than the Coravin ones, but still a huge cost savings. Haven't bought a Coravin capsule since.

Keith Webster said...

can you purchase the threaded cylinders for the ReServe system and use them? they are threaded

Cartridge Man said...

Low-cost iSi argon cartridges can be found here:

WINARO - WineSaver said...

In Europe many take the cartridges from Winaro

or Amazon

Kim said...

Thank you for this post. There is also a company that makes fittings to hook-up the Coravin to an argon tank. Check out if you have a minute.

Le Bistrot du Broc said...

I just bought an adaptator aand tubing from them for my restaurant in France and I will let you know the outcome of it.
Fontainebleau, France

adivis12 said...

Hello Guy,

Can you please comment on how this worked out? Does it work as advertised?

Le Bistrot du Broc said...

I bought the adaptator from bottlethief in California and received after 5 days. Took me 2 minutes to mount it on the Coravin then plus in the hose onto a 2.2kg disposable Argon can.
It works tremendously well and it's saving a lot of money!

Gio D. said...

Gio DeGarimore
Or just buy this: